Hi guys,

I have been flying great with TBS Discovery on a Pixhawk 3.2 version but it is time to move on and there are few reason that a TBS Discovery and Pixhawk is a bad combination (it is just for me I guess).

1. Small space in between top and bottom plate. Pixhawk required a complex vibration damping and if you want to go for the 3d printed, you just don't have enough space to mount both the 3D Vibration Damping and the Pixhawk.

2. Gimbal, there is absolutely no perfect way to mount the gimbal, it is nearly impossible to manage all the wires and once you crash, everything just look like a mess.

3. Heat, maybe it is just me, but my quad heat up very quick. I have Tbs core and minimosd installed on top of each other, there is just not enough air going through the quad.

So it would be great if someone can help me to choose the right frame. I would love to keep all my electronics, from ESC, motors (900kv TBS Motors), battery 3 4500mah 4s battery etc. and just change the frame. My thought stay with Hoverthings flip fpv pro-g, seems like a very solid frame.

My goal is to have a clean frame with "clean" plate and enough room for all my electronics, fpv, uhf, gimbal etc.

Thank you so much for all the help.

Best regards,

Long

p/s: Please excuse my English as it is not my first language.