Tricopter: throttle not responding
I cannot get the throttle to work in any of the manual flight modes. Its fly fine before upgrading to 3.2
Will Arm and with small movement of the stick goes to about 2/3rd throttle, and sounds like it slowly creeps up to just under 1/2. Can hear the change in motor speed with Yaw and Pitch sticks.
Configuring ESCs has been done and when testing before unplugging battery, the motors easily and quickly come up to take off speed at about 1/2 the stick travel.
I have reset and started from scratch with the controller, and APM Board but is still the same.
running an APM 2.7 HK Flight controller
FlySky Taranis and V8FR II HV rx
DJI 2212 motor
Afro 30A ESCs9In props
Replies
Did you configure your ESC's?
Yes, I did it several time and they spin fine at full throttle, but when I arm it after that it doesn't