Iris+ External Arm LED Replacement

Posted by Craig on March 30, 2015 at 9:10am
I crashed my Iris+ over the weekend and am having trouble finding replacements for the external LEDs that go underneath the arms. Two of cables snapped in the crash. Does anyone know where I can get an exact or near-exact replacement?-Craig

You need to be a member of diydrones to add comments!

Join diydrones

Tags: arm, iris+, led
Email me when people reply –
Follow

Replies

  • Ronald C Lang March 30, 2015 at 10:29am
    superbrightleds.com has them
  • Martin Ginkel March 30, 2015 at 9:59am

    What about re-soldering wires?

    I just re-connected the rest of flex-cable that was still on the LED. Be aware that the shrinkwrap-part contains a resistor limiting current through the LED.

    You need to scratch some new solder pad into the flex-cable with a knife, the conductor is some copper-alloy, soldering works well.

    • Craig > Martin Ginkel March 30, 2015 at 10:07am

      Yeah, I guess that's not a bad idea. Just a pain in the butt. I'll make this my plan B. I'm going to give them a call later and see if they'll sell me a couple.

  • Jimmy Oliver March 30, 2015 at 9:14am

    I'm missing one also...

    • Craig > Jimmy Oliver March 30, 2015 at 9:18am
      I know they're just nice-to-haves but it shouldn't be so hard to find a replacement! I can't even find anything on 3DR's website.
    • Jimmy Oliver > Craig March 30, 2015 at 9:22am

      I will look into finding so

This reply was deleted.