Hi,
Thanks everyone for all the help I have been getting. I was wondering if there are instructions on how to setup the ArduCopter code. For example, how to calibrate the gyros, radio, and anything else I might want to do.
Thanks!
You need to be a member of diydrones to add comments!
Replies
Ok, well maybe I need the clarify... I'm pretty knew at coding, but I have come along way since December.
I'll start by trying to figure out why I can't see the gyro movement in Mission Planner when I upload the firmware through Arduino. I can view the gyro movement when I upload the firmware directly through the mission planner.
I'm thinking there is something I am missing when I am initially setting up the firmware.
What settings should I be changing for a X quad.
Thanks!