Video streaming using UVC device

Thank's to Guillerme Blanco  we can have video for FPV in our Tower with this device http://es.aliexpress.com/item/USB2-0-Video-Capture-Card-composite-4-Channel-Usb-CCTV-Window-Linux-MAC-New-Arrival-captura/32331437784.html?detailNewVersion=2 

Here we have some information:  https://github.com/DroidPlanner/Tower/pull/1678

https://github.com/DroidPlanner/Tower/wiki/Custom-video-stream

Here a video: https://plus.google.com/communities/109498440846585781402

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Ah ............ forgot to say that I'm not using the newer Mission Maker because I got an "Parse Error"

  • You can still find the Tower and Tower beta as an .apk file for downloading and install.

    The Mission Maker looks similar :)

    I solved the problem with a tablet from "Flysight"

    This nice device is with HDMI in and HDMI out. I run Tower and with an switch I connect or disconnect the 5.8GHz Video and have the real time image on the screen with the Tower voice in the background informing the parameters (height, battery, etc)

    Both antennas and Rx connected at the same time.

    See some foto:

    Works fine for me :)

    R0020451.JPG

    R0020452.JPG

    R0020453.JPG

  • Noted Tower disappears from Google play. Have briefly tried Mission Maker.

    Cala said:

    Tower was stopped developing some time ago now, try with Mission Maker, its a remake, if you have better luck.

    Video streaming using UVC device
    Thank's to Guillerme Blanco  we can have video for FPV in our Tower with this device http://es.aliexpress.com/item/USB2-0-Video-Capture-Card-composit…
  • Tower was stopped developing some time ago now, try with Mission Maker, its a remake, if you have better luck.



  • Bernardo said:

    Still no advance here:

    When I connect the video Rx module to the tablet running Tower, the program (Tower) goes off.

    Also, it is not possible (no signal or black screen) to run the Tower app showing video screen

    and flight data on Tower simultaneously.

    Please, could somebody explain me what I'm missing?

    Thank's

    Any luck to get the video streaming to your tablet ? Over a year ago, I was successful to stream a video to my tablet without using USB OTG hub, so I was not able to connect the telemetry radio at the same time. But now I forgot what I did to succeed in the streaming.See attached my UVC receiver connecting to the Android cellphone running Tower V4.0. I set up all according to the Wiki (Video streaming using UVC device), such as UDP, check "UVC video" and decheck  "Solo video" . But when I connect the UVC receiver to the cellphone, and then open Tower, the app keeps on stopping and close. I just can't remember what I did a year ago.

    Let me know if you make any progress.

    Frankie

    IMG_1879.JPG

    Video streaming using UVC device
    Thank's to Guillerme Blanco  we can have video for FPV in our Tower with this device http://es.aliexpress.com/item/USB2-0-Video-Capture-Card-composit…


  • Bernardo said:

    Still no advance here:

    When I connect the video Rx module to the tablet running Tower, the program (Tower) goes off.

    Also, it is not possible (no signal or black screen) to run the Tower app showing video screen

    and flight data on Tower simultaneously.

    Please, could somebody explain me what I'm missing?

    Thank's

    Any luck to get the video streaming to your tablet ? Over a year ago, I was successful to stream a video to my tablet without using USB OTG hub, so I was not able to connect the telemetry radio at the same time. But now I forgot what I did to succeed in the streaming.See attached my UVC receiver connecting to the Android cellphone running Tower V4.0. I set up all according to the Wiki (Video streaming using UVC device), such as UDP, check "UVC video" and decheck  "Solo video" . But when I connect the UVC receiver to the cellphone, and then open Tower, the app keeps on stopping and close. I just can't remember what I did a year ago.

    Let me know if you make any progress.

    Frankie

    IMG_1879.JPG

    Video streaming using UVC device
    Thank's to Guillerme Blanco  we can have video for FPV in our Tower with this device http://es.aliexpress.com/item/USB2-0-Video-Capture-Card-composit…
  • Still no advance here:

    When I connect the video Rx module to the tablet running Tower, the program (Tower) goes off.

    Also, it is not possible (no signal or black screen) to run the Tower app showing video screen

    and flight data on Tower simultaneously.

    Please, could somebody explain me what I'm missing?

    Thank's

    :)

  • This is a cool feature.

    But I'm wondering if that only works for the 3DR SOLO ???

    I tried to get video on the Tower App (v.4.0) but when I connect the telemetry (433MHz)

    over the OTG USB hub, the Tower App shuts down (disconnect) every time)

    Also the UVC dongle does not show the green led 'on'.

    I looked in the settings, have UDP enabled (5700 serverport) and also UCV enabled.

    Could somebody who had success already enlighten me please or direct me to where I can educate myself? :)

    Please see the pic to see the hardware.

    R0019783.JPG

  • Nice thank you

    It's exactly what i was looking for.

    And the Telemetry module should word with the USB OTG HUB ;-)

    JL

This reply was deleted.