I'm having trouble with an Inspire2 photogrametric mission. When I try to start (auto mode) it shows the following message:
Auto mode failed - the radius of mission is over the acceptable limit.
If I takeoff in manual mode, I see I cant go further than about 30m height and 50m distance. I've checked all parameters, all fine. Flying with DJI Go it flies without problem (no restrictions set up). Why
can't I fly with UgCS? Maybe is it a DJI firmware issue?
Thanks in advance.
You need to be a member of diydrones to add comments!
Quote from another of our users:
Maybe this helps
Unfortunately not. I already tried that on july 2nd with no success: deleted and reinstalled DJI Go app, even deleted and reinstalled UgCS app. The only way to avoid restrictions was manually fly with DJI app.
Luis, one of our customer writes on Facebook that this helped him:
I hope this helps you too.
Thanks so much Artürs, looking forward to your changes.
Keep doing a good job !
DJI announced that starting from July 1 all DJI drone users are required to Login into their DJI accounts. Without registration the flight of DJI drones will be limited to a 50-meter (164-foot) radius up to 30 meters (98 feet) high.
More detailed DJI announcement: http://www.dji.com/newsroom/news/dji-updates-process-for-activating...
We are doing our best, to implement new requirements of DJI SDK4 into UgCS for DJI, to ensure flights without limits once DJI registration process will be completed.
We will inform you as soon as the new version of UgCS for DJI will be released. You will need to update UgCS for DJI and complete DJI registration process.
Thank you for your understanding,
UgCS Support Team