I am new user of this software and I would first like to thank the devellopeurs for this very good
Dji has completely abandoned us with the ground station and we are happy to test ugcs.
I did a test today with the free version and a dki wookong M quadri.
The field of the test is at 30m AMSL and my flight is planned to 30 AGL. The drone has been well
connected with the return telemetry. I upload the flight, the drone take off but it remained at
7m above the ground instead of 30 m .I had to interrupt the automatic flight before the trees. I re-tried several times with the same issue.what is the problem?
Thanks for answer
You need to be a member of diydrones to add comments!
Please check that "Take-off point altitude" is correct - https://www.ugcs.com/files/PDFs/Manuals/v2.9/user-manual.pdf (Page 43). It can differ from altitude received from geoserver. If it correct, please send me your log files: https://www.ugcs.com/en/page/support
And after all you can test our new beta - https://www.ugcs.com/en/page/ugcs-version-2-10-beta
i find log for the yesterday fly
i would like to test again today on the field
any suggestions ?
thanks a lot