Gender
Male
About
Location
Kempton Park
Please tell us a bit about your UAV interest
Commercial UAV Development
Hometown:
Kempton Park
Activity Feed
"Hi There
I am trying to set the PIDs for a new Octo i build. It is a custom build for heavy lift. What i have found is that when i try to tune manually with ch6 the values given does not want to locked and goes back to the old values
Any body who…"
I am trying to set the PIDs for a new Octo i build. It is a custom build for heavy lift. What i have found is that when i try to tune manually with ch6 the values given does not want to locked and goes back to the old values
Any body who…"
"Hi Shaun
My name is Wally and i am from South Africa. Currently we building a Octo with 28inch props with overlays. Would keep you posted on what i found as i am also using U8170KV motors"
My name is Wally and i am from South Africa. Currently we building a Octo with 28inch props with overlays. Would keep you posted on what i found as i am also using U8170KV motors"
"Hi Andy
I am flying with U7 490KV T-Motors fitted with 20x5.5inch props. On Monday when i did the first flight i took off in STABILIZE mode and when i switch to ALT HOLD the motors stopped and sounded like Pixhawk was rebooting. Tuesday we placed…"
I am flying with U7 490KV T-Motors fitted with 20x5.5inch props. On Monday when i did the first flight i took off in STABILIZE mode and when i switch to ALT HOLD the motors stopped and sounded like Pixhawk was rebooting. Tuesday we placed…"
I have fitted a pixhawk that was provious on a plane and loaded it with the latest copter firmware. i am finding that the pixhawk is rebooting itself everytime it gets to 50% throttle. is there anyone who can assist
"I just completed a forensic test flying at 20 mts. Got 1mm resolution pics. I have a SF11. Will give it a shot. Send me ur mail address and I will send you some of the work I did"
"Hi Cala
What was your Altitude. "
What was your Altitude. "
