Please tell us a bit about your UAV interest
1
About
Hometown:
1
Activity Feed
"I solved the problem today by updating to Plane 3.6 and resetting all of the parameters to default."
"A similar thread is this one, but there was no definite answer. I'm running Plane 3.5."
"The failsafe on the RC receiver is set to 1100, and Mission Planner verifies that when I turn off the transmitter. The problem is that the autopilot is triggering the failsafe when the throttle is above 1100, i.e. when the transmitter is turned on…"
Hi there,I moved my Pixhawk from my Bix3 to my new MyTwinDream airplane. For some reason, the throttle failsafe works in reverse. When I turn the Tx off, failsafe is off, and when the Tx is turned on, the failsafe is also on.I had the Pixhawk dialed…
