Gender
Male
About
Location
West Palm Beach, FL
Please tell us a bit about your UAV interest
RC Lawn Mowers
Hometown:
Miami
Activity Feed
"@DROTEK It looks awesome guys, still wondering though how is this new module (either the base or station) going to interface with a Pixhawk. Thanks."
"@DROTEK It looks awesome, is it compatible and ready to use with Pixhawk? "
"Thanks Gary Gary McCray said:
Hi AJ152,
This wiki page covers the variety of sensors currently interfaced to the Pixhawk and ArduRover code.
http://ardupilot.org/rover/docs/common-rangefinder-landingpage.html
Hope this helps,
Gary"
Hi AJ152,
This wiki page covers the variety of sensors currently interfaced to the Pixhawk and ArduRover code.
http://ardupilot.org/rover/docs/common-rangefinder-landingpage.html
Hope this helps,
Gary"
"Any updates or word on this product?, is the XXL board with a M8P chip coming out soon?"
"Or the SMARTNAV L1 RTK GNSS?
Thanks for your input. AJ152 said:
Thanks Chris, any chance you tried the NEO-M8P?, with the C94-M8P boards? Chris Anderson said:
I've got both and haven't really got either working with Pixhawk yet reliably. I'm sure…"
Thanks for your input. AJ152 said:
Thanks Chris, any chance you tried the NEO-M8P?, with the C94-M8P boards? Chris Anderson said:
I've got both and haven't really got either working with Pixhawk yet reliably. I'm sure…"
"Thanks Chris, any chance you tried the NEO-M8P?, with the C94-M8P boards? Chris Anderson said:
I've got both and haven't really got either working with Pixhawk yet reliably. I'm sure the problem is on my end, but they're definitely not…"
I've got both and haven't really got either working with Pixhawk yet reliably. I'm sure the problem is on my end, but they're definitely not…"
Hello, I have three basic/newbie type of questions, if someone can help me please: 1.) Can I buy the Evaluation kit C94-M8P for my personal Rover Project? https://www.u-blox.com/en/product/c94-m8p2.) Is this board compatible with Pixhawk, and which…
"Hi Michael,
Were you able to test the C94-M8P boards (with the M8P chip)?, I'm wondering if I can connect those boards to Pixhawk for RTK Michael Papenhagen said:
Hi Beryl
Thank you very much for clearing that up for me.
We are in the process of…"
Were you able to test the C94-M8P boards (with the M8P chip)?, I'm wondering if I can connect those boards to Pixhawk for RTK Michael Papenhagen said:
Hi Beryl
Thank you very much for clearing that up for me.
We are in the process of…"
Hello,I've been reading lots of forums and posts out there about RTK, affordable equipment like Reach RTK and Piksi, but Piksi seems it requires lots of configuration and according to some posts lots of things could go wrong, and as for the Reach…
"Thank you Thomas Thomas J Coyle III said:
@AJ152,
Have you read this section of the ArduRover Wiki?
Regards,
TCIII AVD"
@AJ152,
Have you read this section of the ArduRover Wiki?
Regards,
TCIII AVD"
"This is great info, thank you Gary. Do you suggest other types of Sensors for a Rover? Gary McCray said:
Short answer is a qualified yes.
All SONAR transducers are basically high frequency speakers - in this case transceivers operating as both…"
Short answer is a qualified yes.
All SONAR transducers are basically high frequency speakers - in this case transceivers operating as both…"
Hi, I'm a newbie configuring a Rover to follow waypoints, i'm using a Pixhawk + 3DR GPS to guide it, and it does a good job overall but I'm trying to understand why my rover isn't going in straight lines rather than weaving all over. I'm getting 14…
Hi there,Can a Maxbotic I2C Sonar EZ4 create interference on my equipment Compass, GPS, Telemetry, and RX from RC if installed near them?Thanks.
"Thanks, Thomas, do you think the Pixhawk could be the way to go in this scenario? Thomas J Coyle III said:
@AJ152,
Your biggest problem here is that the APM2.8 cannot execute EKF1/2 which is far superior to DCM in providing consistent navigation.…"
@AJ152,
Your biggest problem here is that the APM2.8 cannot execute EKF1/2 which is far superior to DCM in providing consistent navigation.…"
"Hi Chris, no I haven't try the Pixhawk, I bought an APM 2.8 to test it, but it then read Pixhawk are a much newer hardware, but also more expensive, so I wanted to give the APM a try. The code I'm using for the rover is ArduRover v2.51-beta from…"
I'm having a bit of a problem with WayPoints, when creating WPs in Mission Planner and I send them up to the APM 2.8 and those are uploaded successfully, the issue is when I read the WayPoints back to confirm they are okay, most of them are off,…
