"I would just like to add that if it is not your first mission, make sure after you have sent the mission to IRIS, load it back into your Mission Planner to make sure it was successfully loaded.

I had an incident using DroidPlanner (still in beta)…"

"Agree with all of these.
I had, what I would consider a moderately hard landing (had to drop it from ~1' off the ground) and the long picoatinny leg snapped at the top where it clamps on.  I really like the idea of a modular accessory system, but if…"

"I was mostly referring to the switches and dials on the transmitter remote.  Besides the joysticks, the only one that I can figure out is channel 6 for the gimbal rotation."

"Thanks for this... is there any explanation as to what all of these do?  Doesn't seem to mention any of them in the manual."

"Quick tip on getting the prop adapter on: I screwed mine on, and it seemed to thread itself over the threaded area easily until I had enough room to thread put the prop, washer and nut on. Used an  8mm socket to do the rest of the work.

Still a…"