Gender
Male
About
Location
Riga
About Me:
Control all your unmanned vehicle with a single software! Universal Ground Software www.ugcs.com
Please tell us a bit about your UAV interest
Developer at www.ugcs.com
Hometown:
Riga
Activity Feed
"Hi Rana,
Currently UgCS officially supports Ardupilot-flavor of Mavlink (Planes, Rover, Copters). Other Mavlink flavors might or might not work (partially or fully) depending of how the flavor differs from the Ardupilot."
Currently UgCS officially supports Ardupilot-flavor of Mavlink (Planes, Rover, Copters). Other Mavlink flavors might or might not work (partially or fully) depending of how the flavor differs from the Ardupilot."
"Hi Randy,
Thanks for the hint. We will add take-off command to the UgCS in one of future releases. BTW, is there a way to get the release version number from the Ardupilot using Mavlink? By knowing it, we can show/hide unsupported command…"
Thanks for the hint. We will add take-off command to the UgCS in one of future releases. BTW, is there a way to get the release version number from the Ardupilot using Mavlink? By knowing it, we can show/hide unsupported command…"
"Hi, Hamed!
Yes, with "Ardupilot UgCS One" version it will be possible to control both APM and Pixhawk based boards. The only requirement is to have Ardupilot software. So in theory, any other HW will also work, as soon as it runs Ardupilot SW."
Yes, with "Ardupilot UgCS One" version it will be possible to control both APM and Pixhawk based boards. The only requirement is to have Ardupilot software. So in theory, any other HW will also work, as soon as it runs Ardupilot SW."
We were excited by Pix4D’s Chillon project (http://pix4d.com/chillon/) and decided to make our own 3D reconstruction attempt using our U[g]CS software, DJI Phantom + GoPro and, of course, Pix4Dmapper.Now we want to share how we made 3D…
