Location
San Jacinto, CA
About
Please tell us a bit about your UAV interest
aerial imagery, GIS, mapping
Activity Feed
"Yeah, you have to source that online. It is hard to find at a local shop.
ImageJ works for multispectral, it's just hard to do anything else with it, i.e. overlay other data and make maps."
ImageJ works for multispectral, it's just hard to do anything else with it, i.e. overlay other data and make maps."
"I did a test between Pix4D and Photoscan. I thought the results from Photoscan were better and I think the processing times were quicker as well."
"I use ArcGIS. It is what I am most familiar with. It is easy enough to calculate NDVI or other indices with the image analysis tools. I have calculated NDVI using my own IR images from a modified Canon and they work pretty well."
"NatGeo,
If you want to map maps and digitize the features you mentioned, there are a few good solutions. There are open source GIS solutions like Quantam and GRASS but I prefer ArcGIS (it's what I was trained in). You can get a home license for…"
If you want to map maps and digitize the features you mentioned, there are a few good solutions. There are open source GIS solutions like Quantam and GRASS but I prefer ArcGIS (it's what I was trained in). You can get a home license for…"
"I was finally able to arm the ESCs by resetting the APM. Now my throttle is inverted. Up is off and down is Full. Does anyone know how to fix that?"
I just received my RTF quadcopter and can't seem to get it to receive any RC signals to calibrate the ESCs. The wiring from 3DR for RC connection is all single wire. I connected these to the S pin on my RC receiver but nothing seems to be working. I…
"I have been following this thread and have started building my own X-5. I am just about ready to start manual test flights before I run it on the APM. I am new to R/C planes and have a few questions. What servos are you using for the ailerons? How…"
