Gender
Male
About
Location
Wichita, KS
Please tell us a bit about your UAV interest
Photomapping for agricultural use Aerial photography
Hometown:
Wichita
Activity Feed
Greetings,I am working on a new setup for my current hexacopter and it requires going from 11" props to 13" props. I have worked out dimensions (in a 3D modelling program) that will be needed in order to extend the motors so the props will have…
"@Patrick, Great! Thank you so much. So with an antenna tracker should I be able to see video out to a mile using a Rocket with the Netis? I'd like the max range to be at least a mile"
"@Patrick, That makes a lot of sense! I get it now. What dongles would be the most dependable for signal strength, range, and compact size? What one do you use on your quad?"
"@Patrick, So would you recommend running a Rocket M5 on the quad and a Nanostation on the ground w/ antenna tracker? Or two Rockets, one on the quad and one on the ground? I've looked over your antenna tracker tutorial and might give that a shot.…"
"@Patrick Duffy
Excellent information thank you. I've been looking into the Ubiquiti hardware you've mentioned, the Rocket/Nano M5. I would want that over the 5.8Ghz if it will be lower latency and better resolution. My last question (hopefully) is…"
Excellent information thank you. I've been looking into the Ubiquiti hardware you've mentioned, the Rocket/Nano M5. I would want that over the 5.8Ghz if it will be lower latency and better resolution. My last question (hopefully) is…"
"@The Sun
I may be wrong but can't I use the RPI as a converter to analog out through the 3.5mm composite?"
I may be wrong but can't I use the RPI as a converter to analog out through the 3.5mm composite?"
"That is extremely impressive for WiFi! I will look into that. I am a bit confused by not needing an RPI however, as I wouldn't be running an OSD on the quad.
The things I need to do are:
1. Live feed stream with HUD containing battery voltage,…"
The things I need to do are:
1. Live feed stream with HUD containing battery voltage,…"
"Thank you for the incredibly quick reply! However, I will not be using WiFi at all in the build, just sending the video signal with a 5.8Ghz transmitter. Would all I need to do then is run the stand-alone version of the HUD on the RPI and output the…"
"Patrick,
I will be attempting something very similar although it might not be as complex and need a little advice. I will be running a quadcopter with Pixhawk and RPI, and would like to stream webcam feed, including a HUD overlay (similar to DJI OSD…"
I will be attempting something very similar although it might not be as complex and need a little advice. I will be running a quadcopter with Pixhawk and RPI, and would like to stream webcam feed, including a HUD overlay (similar to DJI OSD…"
I'm working on a new project and trying to get as much information as possible. I've seen people mentioning mavlink, gstreamer, and ser2netWhat I will have is a USB webcam, Pixhawk, and a 5.8Ghz transmitter hooked up to the RPI. I need to be able to…
