Gender
Male
About
Location
Smithfield, UT
About Me:
Retired
Please tell us a bit about your UAV interest
Just got interested and wish to learn more
Hometown:
Utah
Activity Feed
"I think it is the board I pressed on one of the board solder joints at the board started to flash, and it made contact for a monment, so I will need to check the solder on a couple of the posts, hopefully that will do the trick. I'am getting a…"
"I will look around for another cable. I probably have one. I noticed that the board does not flash the red and green lights as much as before, although as I'm writing this its is flashing at the current time. How long does it take a board to boot…"
"When I hit the connect button it tells me that it is trying to connect, but times out with a "no heat beat packlets received""
"Terminal indicates v 2.4.1
Free ram 3455
PW Version 116"
Free ram 3455
PW Version 116"
"I purchase this board maybe 4 months ago, so it should be the newer version."
"I'm not sure how to determine board version. On the red board it says version 1.4. Does that help?"
"Ok, you are beginning to lose me. Explain how I determine the firmware version. I don't know what you mean by MP terminal. Need a little bit more info to understand. "
"What is a boot strap issue? Please explain..
Baud rate was 115200
I need to check APM 1280 or 2560. I have had the board for sometime and have forgotten. I think is is the 2560 board but I will check. I have never had a problem accessing the board…"
Baud rate was 115200
I need to check APM 1280 or 2560. I have had the board for sometime and have forgotten. I think is is the 2560 board but I will check. I have never had a problem accessing the board…"
"Adam, I was only able to load firmware with the latest mission planner version 1.1.41 It was after I loaded the firmware that the mission planner was unable to locate the board. The message I received was that there was "no heatbeat packets …"
One problem after another!I received an error in downloading firmware. Found out that I needed to update misson planner, which I did. Was then able to download firmware. Now with the updated mission planner I'am unable to communicate with the…
