"Another piece of youtube worthy footage!!
Plans of third axis stabilization are in the works to try and get rid of the yaw "swaying" when the wind picks up a little!"
"The ones I'm currently using that work the best are rated at 100g.
Previously I had eight rated at 80g each and I got reasonable results but still some jello."
"Thanks!
It actualy folds down, 4 of the booms hinge into line with te other two making it easy to transport :) http://m.youtube.com/watch?v=UUvqIkAo4CY
This video I made for a project shows it at the beginning."
"The martinez board from hobbyking comes with very bad PIDs and is notoriously sensitive to small changes and tuning. I spent months using the GUI altering the settings holding the gimbal by hand even before I got rid of self enduced oscillations…"
"It took 3 flights to get all the shots seen in the video, a total of about 24 minutes flight time.
I run 9x4.7 inch props, the cheap slow fly ones, and a combination of battery's:
- one 5000mah 4s giving about giving about 6 min of flight
- two…"
"Thanks a lot!
I do think I got a bit too daring at points :/
It is amazing what you can achieve with some cheap electronics, a ton of cable ties and some patience.
Here is my first ever multirotor footage from a home built quad!!…"
UPDATE:Spent another evening capturing some footage on the farm of cultivating this time. Wind picked us slightly causing some unwanted yaw wobble in the shots but overall im very pleased.Take a look, I hope you will enjoy it: After many months of…
Hi All,So ill get straight to the question:Is there any way to have manual control over the yaw axis whilst my hexacopter is completing a mission in auto mode?Im running a APM 2.5 board with the latest V3.1.3 firmware on my DIY hexacopter, only…
Hi all,I have recently fitted my home built tricopter with the APM 2.5 after fling it with a kk2.0 all stock PID's are perfect apart from Yaw.My tricopter seems to waver from side to side in normal stabilize mode slightly witch it didn't do with the…