Gender
Male
About
Location
Paris
About Me:
Student in Supaéro, French Engineering school. Member of the UAV club. UAV enthusiast RC pilot PPL license
Please tell us a bit about your UAV interest
Intern at the ENAC UAV Lab (Paparazzi)
Hometown:
Amiens
Activity Feed
"Hi!
Problem solved! It had to do with the compass pull-up to 5V.
I am not sure why, as I2C on APM is 3.3V, but when I enabled the pull up on the compass board it started to operate as expected.
It is still a mistery why it was working on usb power…"
Problem solved! It had to do with the compass pull-up to 5V.
I am not sure why, as I2C on APM is 3.3V, but when I enabled the pull up on the compass board it started to operate as expected.
It is still a mistery why it was working on usb power…"
Hi everybody!I just got an external compass for my apm2.5 2 days ago because I had a compassmot interferences above 100% :(I received it 2 days ago and installed it. I tried it with the apm powered by usb and everything looked good. I even did a…
"Yes that would be the easiest but I already have the 433 radio which makes my setup a bit more "legal" ;)"
Hi everybody, I am planning to use a 3DR radion 433MHz together with a dragonlink. I just noticed that it is possible to tune the 3DR frequency band from 410-420MHz which would help me to have it working with the dragon link. Have you ever tried…
Hi everybody! I just invested in an Ardupilot Mega 2.5 with a datalink set. I was wondering if there was some code allowing the autopilot to receive commands from the datalink? My plan is to use a conventional transmitter but also to be able to use…
Hi everybody!Here is my today's flight using arduIMU as stabilization system and homing system. This project aims at creating a versatile ans intuitive system for fpv planes and an emergency system bringing back the plane in case of video or rc link…
