Gender
Male
About
Please tell us a bit about your UAV interest
Building for terrain surveillance and geometry.
Hometown:
Minneapolis
Activity Feed
"[SOLUTION]
I needed a higher voltage battery; 6S."
I needed a higher voltage battery; 6S."
I've been struggling to diagnose a problem with my drone losing altitude in multiple situations.The first situation where it loses altitude is in auto mode, when taking corners, the drone stops, and then drops up to 6 or so meters, before turning…
Is there any way to make a python script run automatically as soon as a telemetry link is established? I am trying to control data collection from my script, and would like to toggle when that begins and ends as hands-off as possible.Here's the…
"Wiring the lidar to GPS1 works, but I still wonder if it's possible to get arducopter to read from I2C 2 without too much trouble."
Hi,I'm having trouble getting a lidar device to connect to the PH2.1 via the "I2C 2" bus. I have read another post suggesting that arducopter is looking at the "GPS1" bus rather than the I2C 2 bus, and that in order to utilize I2C for sensory input…
"Alright, everything works now as it should. The problem was that in Mission Planner, under full parameters, I needed to change the baud rate for serial 1 from 9 to 57. I do not know why this is not updated automatically when you change the baud rate…"
"Actually, not entirely solved. I still have one problem that I am stumped on. If I set the baud rate for everything (radios, MP, and COM port) to 9600, everything works great. But if I set everything to 52600, I can't connect.
Is it that the radios…"
Is it that the radios…"
"Solved!
The problem was that the USB port had a baud rate set to 9600 whilst the radios were set to 15200."
The problem was that the USB port had a baud rate set to 9600 whilst the radios were set to 15200."
Title. The radios I am currently using are not 3DR, although that seems to be the overwhelming preference of this community. The radios themselves are able to connect to one another without issue, as indicated by a solid green light (no red light…
