Gender
Male
About
Location
Smithers BC
Please tell us a bit about your UAV interest
Photogrametry Surveys
Hometown:
Smithers BC Canada
Activity Feed
"Is this connection likely to be added to UgCS for DJI in future updates?"
"OK thanks Alexey,
I thought that since we were using UgCS, that it's altitude values overrode the DJI Go settings."
I thought that since we were using UgCS, that it's altitude values overrode the DJI Go settings."
We have a TurboAce Matrix with an A2 FC that we have just upgraded to lightbridge2. With the LB2 we need to connect via the UgCS for DJI app, is this compatible with the A2 flight controller?Thanks.Colin
"Thanks Anna, I seem to have 2 threads going, I originally started this thread with this problem then found another thread that was related so commented there as well. I'll try and keep to this one.
As far as the altitude settings go, in the vehicle…"
As far as the altitude settings go, in the vehicle…"
"Thanks for your comments, I originally started a new thread with this problem then found this thread so commented here as well.
As far as the altitude settings go, in the vehicle profile we have 'Max AMSL' set to 3000m (actual elevation 1076m), 'Max…"
As far as the altitude settings go, in the vehicle profile we have 'Max AMSL' set to 3000m (actual elevation 1076m), 'Max…"
"Has a solution been found for this problem, as we're having the same difficulty.
I've noticed the issue with updating the Take off Altitude then having it revert back when we upload the mission. Our takeoff altitude discrepancy has only ever been 1…"
I've noticed the issue with updating the Take off Altitude then having it revert back when we upload the mission. Our takeoff altitude discrepancy has only ever been 1…"
We had an issue yesterday that I'm hoping someone will be able to help me with.When trying to start a mission by activating Auto Mode we kept getting an "Altitude too high" error. It doesn't say what altitude it's referring to and everything we…
I've been experimenting with GeoSetter to geotag imagery taken from an M600.Is anyone using this software? I've been able to sync photos with telemetry data in gpx format using the "Use track point from map" option. The issue I'm having now that I…
"OK Alexey, I thought that was probably the case but good to have it confirmed.
The parameters we usually view are all the checks that DJI does under the aircraft status label things like compass, imu, esc status etc.
Thanks for your help.
Colin."
The parameters we usually view are all the checks that DJI does under the aircraft status label things like compass, imu, esc status etc.
Thanks for your help.
Colin."
We fly a Matrice 600 and we usually start a mission by powering the UAV and checking all parameters in the DJI Go app then switching to the UgCS for DJI to fly the mission. UgCS has a return to home altitude in its route creation screen. There is…
"I can provide some data for testing, I'll put some together and get back to you.
Regarding the link to the ucs-telemetry-tool above, is there an easy way to get this, I'm not familiar with github and don't seem to be able to download an executable…"
Regarding the link to the ucs-telemetry-tool above, is there an easy way to get this, I'm not familiar with github and don't seem to be able to download an executable…"
"Yeah the tiffs are from a thermal camera and we lose the temp data if we switch to jpgs. Is there any talk of UgCS supporting tiffs with the geotagging tool?
Colin"
Colin"
"Thanks Alexey.
I should have known it wouldn't have been as easy as just connecting the laptop to to the controller. Thanks for trying this."
I should have known it wouldn't have been as easy as just connecting the laptop to to the controller. Thanks for trying this."
