Gender
Male
About
Location
Ab
Please tell us a bit about your UAV interest
FPV fun flying
Hometown:
Medicine Hat
Activity Feed
"Your assumption is correct I still have JP1 installed and the SBEC is now powering the apm (which in turn powers the minim and the GPS puck)
I was originally concerned with not using a ground on the analog side of the osd, but because of how I had…"
I was originally concerned with not using a ground on the analog side of the osd, but because of how I had…"
"Well I went right back at it and did as I said in my previous post and removed the 12V from the minim board soldered the bridges on both sides. and everything is now powered from the external BEC. It is extremely windy right now so I cant do a real…"
"Well I'm still not having a lot of success. I was originally concerned that the internal .5A bec built into my ESC (that was powering all the 5v)was browning out so I installed a 5v/3A SBEC I had laying around and pulled the power wire off my ESC…"
"well I've had a little bit of success narrowing down the issue but I'm still unsure of how to proceed. The cable is definetly not my issue. I can make the board malfunction (overlay disappears) by giving it a good bump in throttle. I can also get…"
Hopeing someone can offer some insight in what is going on as it is really making me not want to fly this model. I have searched pretty extensively online and can't find anybody with similiar issues. The Minim OSD has never worked properly for me at…
"Gonna bump this old thread instead of making a new one as I am having issues now with my drone after a small crash and now its behaving exactly like the original posters. When switched into loiter it will go into about a 30degree bank in either…"
