Gender
Male
About
Location
Draper, UT
About Me:
UAV geek
Please tell us a bit about your UAV interest
Aerial Imaging
Hometown:
UTAH
Activity Feed
"Just in case it helps anyone else out.
I solved my issue. The problem was a combination of things.
When running off the RC11, the amp draw was just enough to brown out the APM because the Savox servos use a "pot" for position sensing. When…"
I solved my issue. The problem was a combination of things.
When running off the RC11, the amp draw was just enough to brown out the APM because the Savox servos use a "pot" for position sensing. When…"
Well I've been reading and trying everything I can find but no success. Here is what I have.Hexa with APM 2.5AV130 GimbalGimbal has Savox servos.No matter what I try the setup fails.1. Tried plugging into the RC11 directly which causes APM to reboot…
"I should mention that I am having some problems with the setup. I'm not sure if it's refresh rate on the ESC's to the NAZA but it acts like it's starving for juice when I give it alot of throttle. Kind of a galloping rpm, it's worse on 4s than on…"
"I've got these mounted on the X650. I used the stock mounts that i used a dremel to cut half moon opening on so it would fit around the bolts for the plate. I did have to drill the extra holes in the plate but it's still plenty strong. If you need…"
