Gender
Male
About
Location
Pittsburgh, PA
About Me:
Jetson Community Leader, https://devtalk.nvidia.com/default/board/139/
Please tell us a bit about your UAV interest
Autonomous quadcopter for inspection, sense & avoid, machine learning.
Hometown:
Pittsburgh, PA
Activity Feed
"Hi Mike, Jetson comes with JetPack BSP which includes NVIDIA cuDNN and TensorRT inference accelerator. TensorRT uses graph optimizations, kernel fusion and architecture tuning, and half-precision FP16 to deploy networks with superior performance at…"
"The consumer Teal drone is built around Jetson module and shipping en masse this spring for $1399. It's capable of sustaining 70mph+, so ability for fast processing and collision avoidance is important. Yes, industrial inspection and delivery drones…"
"Well, personally I am interested in developing autonomous UAV capabilities, sense & avoid, collision detection, also realtime mapping with 4K cameras, ect. Always need more compute! The screenshot from OP is FCN-Alexnet segmenation network that…"
"The devkit carrier board is the open reference design that all the deployable designs are derived from, and needs to break out the features off the module, in particular the CSI camera header and multi-display expansion header, M.2 and SDcard slot,…"
"They are very close. Here's the TX1/TX2 Interface Migration Guide.
I sent a pre-release TX2 to Jurgen from Auvidea before the launch. It checked out OK on J120. There was a patch to the device tree, however this is a file you can just copy into…"
I sent a pre-release TX2 to Jurgen from Auvidea before the launch. It checked out OK on J120. There was a patch to the device tree, however this is a file you can just copy into…"
"Hi Jerry, personally I noticed sometimes it is helpful for me to take the module off the devkit and get it on a mini carrier, it gets the wheels turning and then I can get it off my desk and use it practically anywhere. Last night ConnectTech…"
"Also we provide all u-boot and Linux kernel sources in addition to the several-thousand page Technical Reference Manuals (TRMs) for which document the Tegra registers for custom support. In the SoC industry it's typical to have NDA/NRE required for…"
"Debian devs have upstream Debian on TX1: http://elinux.org/Jetson_TX1#Linux_Distributions
And e-consystems has expertise in porting Android. We don't purposely block anyone and have also contributed to tegra nouveau. If you want the full support…"
And e-consystems has expertise in porting Android. We don't purposely block anyone and have also contributed to tegra nouveau. If you want the full support…"
https://devblogs.nvidia.com/parallelforall/jetson-tx2-delivers-twic... is pleased to announce Jetson TX2, the world's preeminent embedded computing platform for deploying deep learning, computer vision, and advanced artificial…
"NVIDIA has released JetPack 2.3, the latest update for Jetson TX1 includingupgrades to Ubuntu 16.04 aarch64, CUDA toolkit 8.0, and TensorRT with up totwice the deep learning inference runtime performance and power efficiency.
See the Parallel…"
See the Parallel…"
"Hello, perhaps you may be interested in the Deep Learning resources listed under the TX1 wiki?
http://elinux.org/Jetson_TX1#Deep_Learning
> what objects can be recognized and what information can be interpreted?
Objects or signals that are in your…"
http://elinux.org/Jetson_TX1#Deep_Learning
> what objects can be recognized and what information can be interpreted?
Objects or signals that are in your…"
"Cool! Snap a video of the drone landing.
We've released the latest 64-bit L4T BSP and JetPack for TX1, version R24.1.
BTW, I have a robotics colleague at NVIDIA from Tokyo who works on Jetson, if you can meet up sometime. He uses J120 too."
We've released the latest 64-bit L4T BSP and JetPack for TX1, version R24.1.
BTW, I have a robotics colleague at NVIDIA from Tokyo who works on Jetson, if you can meet up sometime. He uses J120 too."
"Hi Randy, here's a link how to disable the kernel log on tty0: https://devtalk.nvidia.com/default/topic/931661/jetson-tx1/disable-..."
"Impressive design Jurgen, looks really cool. I like how it can operate standalone and match the module's footprint, or cleverly interoperate with the motherboard for additional functionality. We'll pre-order when available. We also recently…"
"@Patrick I can send you the docs, request is in your inbox. Thanks!"
"That's a really cool use-case, I like. It's exciting because there's a lot within grasp, given the capacity for a "high level of autonomy", as Patrick mentioned earlier. Can't wait to take-off!"
