"Or the regular airfoils (found on rc groups)
MH45
MH60 10%
ritz
PW51"

"Great! Does it help much for jello?

I have measured how long I could fly with a 3S 4000mah 20C battery, and it was about 20minutes, it was not hovering, but it was having fun, my end voltage was 11,1 I think. There was 3000mah back in the lipo."

"Here is a video where you can make a anti vibration thing: http://youtu.be/PuNhiJAVum0
It is very easy to make, and i am going to make it too."

"i have the same problem with the props, bu on 3s they are fine, but if i fly evry day, the are getting white too at the root."

"I solve the jello by making a battery tray under the tri, it is like rcexplorers design but not with Metal rod's but with thik zipties, but then i had the problem that is wobbels from Side to Side i solved it by talking a small Metal rod and gluing…"

"you can fly better than me. I can only fly with the tail towards me or like 90 degrees, i am still practicing on flying towards me, but right now i can`t fly becouse i have a yaw problem."

"i have got a mobius too! they are very good cameras for me! but you can make a video from the sight, it does not need to be the best video in the world :)"

"Have fun with 4s!!!!! When I have a 4S I will try it!! Do you want to post a video on 4S? That will look so cool!!!"

"Thanx! I will post a video when it flys good."

"Okay, i will do this later on the day or tomorrow, now I do not have much time, and I want to take the time for this."

"Do you need to adjust the pid's often? I can fly in the garden and we got just on the sight of the house a prairie.

The cables need to be like this? http://abload.de/image.php?img=image6ksxv.jpg"

"I have got a laptop, so I can do it with that."

"okay, an i can just use the cables from the reciever to the board? or do these cables need to be connected? a bluthoot module should be muck easyer, but i do not have a bluthoot phone."

"i do not have a link to the board. but i got some pictures: http://abload.de/image.php?img=imag00030okcb.jpg http://abload.de/i...
i know it is really difficult too see, but i wiil try to put some pictures later on from…"

"Hello,

I got the board, but I want to change some settings, but I don't know where to plug the ftdi in.
It is the multiwii Crius SE v2.0 with I2C on it. This is a link to the ftdi:…"