Gender
Male
About
Location
London
About Me:
Aerospace engineering student
Please tell us a bit about your UAV interest
At the moment I'm assembling a UAV platform on a small scale paramotor
Hometown:
London
Activity Feed
"Breathtaking shot, can you tell me what model of camera and lenses were used?"
Hi everyone,I need to log power consumption in flight and I'm thinking of buying AttoPilot current and voltage sensor as adviced on the manual; I was just wondering if it's possible to log this info on the flash memory or if it's there purely to…
Hi everyone, I spent the afternoon testing a Multiplex Funjet in a wind tunnel at Kingston University (London, UK) since I need this data for my dissertation project: I will be optimizing it for longest range/glide/altitude/climb rate with the…
I was planning to get a cheap netbook to be brought to the field and adjust ardupilot gain settings and re-upload the sketch, was just wondering if there are any compatibility issues with Win CE which is the standard for most netbooks, thanks
Gyroscopes give information about angular velocity; accelerometers give static and dynamic acceleration (one is opposite of the other in sign). In order to work out angular position along x, y and z axis, none of the two systems is reliable enough…
"
Hi everyone,
I connected the x4 amplified gyro outputs to the analog inputs of Ardupilot Mega. I'm checking the outputs on the serial monitor. In still position they indicate about 250 which is equivalent to about 1.2 volts, it should be ok. The…"
Hi everyone,
I connected the x4 amplified gyro outputs to the analog inputs of Ardupilot Mega. I'm checking the outputs on the serial monitor. In still position they indicate about 250 which is equivalent to about 1.2 volts, it should be ok. The…"
Hi everyone, I was thinking of using ardupilot mega coupled with IMU razor 6 DOF ( http://www.sparkfun.com/products/10010 ) just for stabilization on a tricopter, no gps navigation for now to keep it simple, it can be implemented later on. Has…
