About Me:
It's me!
About
Please tell us a bit about your UAV interest
I want to build UAV
Activity Feed
"I have tested it. It works surprisingly good.
I used APM 2.5. firmware 2.9.1
3DR 433 Mzh
Thomas Scherrer LRS.
Results are:
I set minimum power to 3DR = 1,3 mW. I placed Scherrer 2 meters away with maximum power 2W. Receiver was placed 5 meters…"
I used APM 2.5. firmware 2.9.1
3DR 433 Mzh
Thomas Scherrer LRS.
Results are:
I set minimum power to 3DR = 1,3 mW. I placed Scherrer 2 meters away with maximum power 2W. Receiver was placed 5 meters…"
"Yes, my PID settings are very different for MAJA too. My PID are much higher. My Maja could not fly with this settings described here. I tested it in air. I don't know why it works for Jean."
"I had same problem. I spent several hours and almost gave up. When I connected FTDI only green light was green. No LCD, no Chirp, no connection. I did all soldering again, checked everything and nothing. Then I remembered to turn potenciometers.…"
