Gender
Male
About
Location
Rome
Please tell us a bit about your UAV interest
We are two italian young electronic engineers interested in making our own drone
Hometown:
Rome
Activity Feed
First flight with Enea X601 - custom built heaxacopter - GoPro Hero 3+ Silver - Location Nettuno (Italy)
"Hi duc:
I just intended that in order for the edge to be detected it is enough to set a value between 200 and 600 us. But this value is not the pwm pulse duration.
The pwm pulse duration in ppm is accounted like this:
PPM Signal:
__| 400us…"
I just intended that in order for the edge to be detected it is enough to set a value between 200 and 600 us. But this value is not the pwm pulse duration.
The pwm pulse duration in ppm is accounted like this:
PPM Signal:
__| 400us…"
"Hi, I resolved on my own, just for the curious ones:
1) For PX4 is not important since it watches for the edges, however i used an active low configuration
2) minimum and maximum duration of a ppm pulse is for PX4 between 200 and 600 us
3) the…"
1) For PX4 is not important since it watches for the edges, however i used an active low configuration
2) minimum and maximum duration of a ppm pulse is for PX4 between 200 and 600 us
3) the…"
Hi, I'm trying to feed PX4 with a PPM signal created in software, I can't get it work correctly because I can't find the timings needed.For example,1)PPM pulses must be active high or active low?2)What is minimum and maximum duration of each…
