I'm having a real boring issue with the hexacopter starts beeping and warning for low voltage as soon as I take off.
It doesn't warn when I take off without the camera gimbal attached.
My spec is:
Pixhawk with 3DR power module
Tarot 680 Pro
6x Sunnys
Hello!
I have connected my pixhawk via Serial 4 to the SToRM32 Gimbal controller.
My wishes is to control the gimbal via RC inputs.
My RC transmitter transmits a little twitchy signals and they differ about 10 PWM every sec.
Can I somewhere adjust the R
Read more…Hello!
Im trying to set up my pixhawk to be able to control the yaw and tilt och my 3D-printed SToRM32 based gimbal.
I'm following everything the APM site says but without any results. The pixhawk works, the gimbal works, but I can't control the g
Well! My MinimOSD has been working flawlessly until I let the hexacopter rest for a month. Now these artifacts appear everywhere on the screen except where the actual OSD numbers are. Why does it do this, what is the fix?
I'm experiencing a weird issue: When I calibrate the ESCs in the calibration mode the result is fine and low throttle equals low RPM and there is a big span between the RPM on high vs low throttle.
But when I turn the pixhawk off from calibration mo
