Gender
Male
About
Location
Ottawa, Ontario
About Me:
Wanna By Flight Engineer and/or Flight Steward
Please tell us a bit about your UAV interest
Looking for a cheap way to travel!
Hometown:
Toronto
Activity Feed
"And they the Mission Planner link is dead...
Mission Planner is the software required to setup the Y6. I found a link to it.
Below is a link to the latest version of Mission Planner on ArduPilot page is you need it:…"
Mission Planner is the software required to setup the Y6. I found a link to it.
Below is a link to the latest version of Mission Planner on ArduPilot page is you need it:…"
"I found the link for the calibration instructions. See link below. They are under the X8 support page, but make specific reference to the Y6.
In essence:
- Download the mission planning software (http://3drobotics.com/learn/download_software/)
-…"
In essence:
- Download the mission planning software (http://3drobotics.com/learn/download_software/)
-…"
"Thanks, good idea, I should have thought of that.
ian Stephen Seay said:
I bought the kit from 3DR a couple of years ago when they were on clearance. I have all the manuals, but I don't know a source for downloads. Email 3DR and see if they…"
ian Stephen Seay said:
I bought the kit from 3DR a couple of years ago when they were on clearance. I have all the manuals, but I don't know a source for downloads. Email 3DR and see if they…"
"Thanks. I will look that up. Haygood said:
The Y6 uses an autopilot system called Pixhawk, which uses Arducopter firmware. Pixhawk is very similar to the ArduPilotMega, or APM flight controller/autopilot. So, any programming or testing you need…"
The Y6 uses an autopilot system called Pixhawk, which uses Arducopter firmware. Pixhawk is very similar to the ArduPilotMega, or APM flight controller/autopilot. So, any programming or testing you need…"
I am a little late to this forum!I am building a 2014 3DRY6. I got it a couple of year ago, but then got very busy, so only building it now. I am able to find the 3DR assembly manual on the web, but all of the links into the manual to the 3DR page…
