"YES!! we normally get the plans of the building we shoot a couple days in advance. which reference what height to shoot at, then we make a excel spreadsheet to cross reference the plans of the building. then hang it in front of my cameraman"
"most of the time they are equal spacing. But unfortunately not always it depends on our client needs.
yeah it would be tedious job but to have trigger it at the correct height they would be no arguing at the height of the picture taken
our next job…"
"@laser Developer yeah it was bit extreme most i have done was 50trigger points to 100m. I think 50 is more than enough.
Our average is around 20 to 30 in one flight. "
"How many trigger points do you need?
100 would be enough 50 min
What would be the typical "on time" to activate the shutter?
as soon as the height is reached. one shot maybe 1sec?
Should the trigger take a single shot when the reading is inside a…"
"@laser developer Ok something to think about then please!!
I posted my findings on a few mulirotor/uav forums today hopefully it will create some interest! any maybe give you some more customers! I hope it works!"
"@laser delvoper thanks very much for your help.
any chance you can upgrade the software to make it set-off more than one alarm points?
That would be a real game changer for my work. Cm accurate photos are awesome!"
"well I got the nerve up and tested the shutter cable wired directly to the laser at the min setting which is 1m.
ITS WORKS. i tested it on my movi gimbal outside. I stood in one spot and lift it up and down to get the shutter to work. With out…"
"@laser Developer so I have played around with alarm and i have triggered it but I need VOLTAGE TRIGGERED SWITCH of some sort to trigger the shutter.
I am not a electronics guy and I have no idea about buffer or level translators to get to it work!…"
"@Laser delevoper thanks for the info MMI mode would be nice for my type of work, I will play with the HMI mode to see if i can get to work as i want to. It could be useful. How do i connect the shutter/alarm to the laser?