Gender
Male
About
Location
West Chester, PA
About Me:
fun hobbiest
Please tell us a bit about your UAV interest
arducopter pick up mission
Hometown:
university Park
Activity Feed
I am running from a DX7S, all the help on here seems to be not working... I have an external battery source hooked up directly to the servo, the signal line going into output ch 7, and the signal line from the receiver going from aux 2 (pot on my…
Just upgraded from the basic 3DR motors on my ArduCopter to T-Motors MT4008-12... do I need to simply just plug and readjust my gains in the APM, or do I need to recalibrate my ESCs as well?also... they are not marked which is signal, hot and…
This really might be a dumb question, but voltage across 1 motor will NOT be the voltage of the battery (3S ~ 11.1V) during hover unless full throttle correct? I am on a school project and the team's EE says it is but that makes zero sense to me…
"Chris and Wessie -
Thank you for suggestions... just got the issue.. my partner connected the HOT of the escs incorrectly. Wessie - great idea to go back to the manual for the 4th time! Thanks a bunch! Just got all motors spun :) so excited to…"
Thank you for suggestions... just got the issue.. my partner connected the HOT of the escs incorrectly. Wessie - great idea to go back to the manual for the 4th time! Thanks a bunch! Just got all motors spun :) so excited to…"
Working with the ArduCopter kit with APM 2.6+ (no internal compass) - to get it to want to work had to bypass the pre-arm sequence since it does not contain a compass..When I go to calibrate ESCs, I turn my transmitter on with throttle up, and plug…
