Gender
Male
About
Location
Dorset
Please tell us a bit about your UAV interest
Arducopter and Arduplane
Hometown:
Weymouth
Activity Feed
"I don't know as I haven't flown it yet. I'll post something when I do."
I’ve set up a conventional fixed wing plane with Ardupilot on a miniPix. I have assigned only three modes, Manual, FBWA and Loiter. Testing on the ground Manual and FBWA work as expected but when I switch to Loiter the motor stops and the servos go…
"Thanks criro I'll look into that."
"Thank you very much for your help Stelios. I have installed it now. Cheers Ken"
I use the Tower App for communication between my drones and my Android phone. I uninstalled it recently by mistake and I can no longer find it on the Play Store to re-install it. The earlier versions of Droid Planner are not there either. Is there…
"Thank you Jean-Louis for all that useful information. Regarding your connection diagram of 9 December 2013, I assume that the jumper JP1 is in place so as to power the board from the ESC BEC. Can you confirm this?"
I can’t get APM:Plane to work on a Crius AIO Pro board. I’m using the Mega Pirate NG flash tool, which provides only version 2.76. I have the RC input set to ‘Regular PWM on A8’ which is appropriate for my receiver. I can work through the…
I set up a mission with ArduCopter V3.2.1 over a steeply sloping field with a constant height of 10 meters and Verify Height ticked. I checked that when I cleared the mission and reload it Verify Height was still ticked. But when I flew it the…
"And here is the other kmz file with RTHAPM at Jordon 13 May 2015 (1).kmz"
"Thank you Scott. Here are the log files for two flights and a kmz file for one of them. The first has an RTH and the second has a long drifting loiter.APM at Jordon 13 May 2015 (1).logAPM at Jordon 13 May 2015 (2).logAMP at Jordon 13 May 2015…"
I’ve built a couple of quads using Crius AIO Pro flight controllers with ArduCopter 3.0.1 R4 firmware and they work well. Now I’ve built one with an APM 2.6 clone and although it flies OK in STABILIZE mode it does not hold its position in LOITER.…
