I use the Tower App for communication between my drones and my Android phone. I uninstalled it recently by mistake and I can no longer find it on the Play Store to re-install it. The earlier versions of Droid Planner are not there either. Is there a
Read more…I’ve set up a conventional fixed wing plane with Ardupilot on a miniPix. I have assigned only three modes, Manual, FBWA and Loiter. Testing on the ground Manual and FBWA work as expected but when I switch to Loiter the motor stops and the servos go h
Read more…I can’t get APM:Plane to work on a Crius AIO Pro board. I’m using the Mega Pirate NG flash tool, which provides only version 2.76. I have the RC input set to ‘Regular PWM on A8’ which is appropriate for my receiver. I can work through the calibration
Read more…I set up a mission with ArduCopter V3.2.1 over a steeply sloping field with a constant height of 10 meters and Verify Height ticked. I checked that when I cleared the mission and reload it Verify Height was still ticked. But when I flew it the height
Read more…I’ve built a couple of quads using Crius AIO Pro flight controllers with ArduCopter 3.0.1 R4 firmware and they work well. Now I’ve built one with an APM 2.6 clone and although it flies OK in STABILIZE mode it does not hold its position in LOITER. The
Read more…