Please tell us a bit about your UAV interest
1st time builder
About
Hometown:
Australia
Activity Feed
"Sorry I don't have that with me. From memory you don't need to edit the code. But you need to do it in the advanced settings area. It's a page in the mission planner that lists all the parameters. I'm fairly sure that's how I did it. It's just been…"
"Yes I just mapped one of the other inputs to the channel 4. It's been a long time since I did it so I can't tell you how to do it. But I know I found a way on the apm board to map one of the other unused inputs (5-8) to chanel 4. Trying to fix the…"
"Or is there some way internally I can push the signal from say input 7 to input 4? "
"Okay I've tried to resolder the pin twice and had no luck. I have no idea what it could be. I've also updated the firmware to the latest and I get absolutely no signal reading in channel 4 input. Still works perfectly on the channel 7 input.
I'm…"
I'm…"
"Is it possible for me to change the input assignment so the Yaw signal is read from say input 7? I can't see a way to do it but that would get me around the issue"
Hi folks,1st post and 1st time using the APM 2.5.2. I couldn't find this searching the boards.I'm using the standing turnigy type remote in mode 2. I've plugged in the signal cables from the receiver to the APM and are attempting to do the radio…
