Gender
Male
About
Location
Västerås
Please tell us a bit about your UAV interest
ATG L600 X4, Tiger Motors MT2216-11, HobbyWing 18A w. SiLabs BlHeli 10.3, APM 2.5
Activity Feed
"The rain stopped! :) Programmed a small mission with SPLINE waypoints and ROI. It worked great!
Finally I can record smooth video missions by my self, controlling the pitch of the gimbal against the ROI.
I have not configured the camera gimbal tilt…"
Finally I can record smooth video missions by my self, controlling the pitch of the gimbal against the ROI.
I have not configured the camera gimbal tilt…"
"I used the 10:08 build from the firmware site. http://firmware.diydrones.com/Copter/2014-08/2014-08-15-10:08/apm2-...
Flashed and did a regular recalibration of my hexa. Launched in stab and switched over to AltHold, Loiter, PosHold and it flies…"
Flashed and did a regular recalibration of my hexa. Launched in stab and switched over to AltHold, Loiter, PosHold and it flies…"
"Randy, I flashed the 15-aug 10:08 build ( http://firmware.diydrones.com/Copter/2014-08/2014-08-15-10:08/apm2-... ) and ran through a regular recalibration.
Made a short test flight launch from Stab, Alt Hold, Loiter, PosHold and all seems fine,…"
Made a short test flight launch from Stab, Alt Hold, Loiter, PosHold and all seems fine,…"
"New rc5 is released, will give this one a test on my Tarot 680PRO Hexa now!
ArduCopter 3.2-rc5 15-Aug-2014Changes from 3.2-rc4 1) Pixhawk's max num waypoints increased to 7182) Smoother take-off in AltHold, Loiter, PosHold (including removing…"
ArduCopter 3.2-rc5 15-Aug-2014Changes from 3.2-rc4 1) Pixhawk's max num waypoints increased to 7182) Smoother take-off in AltHold, Loiter, PosHold (including removing…"
"Looks a little like my plate with grommets then pads on the APM. :)"
"This is just amazing!
I first flew the rc6 release two days ago with my old Flycam 925 motors with excellent results. Though I had severe vibrations from two of the motors giving me +-2.5 G i z-acc.
Now two days later I've rebuild the quad and…"
I first flew the rc6 release two days ago with my old Flycam 925 motors with excellent results. Though I had severe vibrations from two of the motors giving me +-2.5 G i z-acc.
Now two days later I've rebuild the quad and…"
