Please tell us a bit about your UAV interest
Noob
About
Hometown:
London
Activity Feed
"Great. Thank you!
I now put throttle down and right for 5 seconds and it arms, down and left for 2 and it disarms - motors spinning as expected."
I now put throttle down and right for 5 seconds and it arms, down and left for 2 and it disarms - motors spinning as expected."
"I suspect the pins are right, but I'm not sure.
I have plugged the x8r into the apm 2.6 with 10 single JST cables. They are all coloured individually and I've plugged 1 on the rx to 1 on the apm, all the way to 8. Then I've plugged 2 others from a…"
I have plugged the x8r into the apm 2.6 with 10 single JST cables. They are all coloured individually and I've plugged 1 on the rx to 1 on the apm, all the way to 8. Then I've plugged 2 others from a…"
"An hour or so after posting, I had partial success. I can now arm (which was the main question of this thread) but I think things are still wonky.
When writing the reply to Johann above, I noticed my radio calibration inputs were 990 minimum. In…"
When writing the reply to Johann above, I noticed my radio calibration inputs were 990 minimum. In…"
"Hi Johan,
My Taranis is in Mode 2 with the throttle on the left. I realised while writing this the EPROM was wiped at one point and the Inputs were different to the Mixes. I have now made both the inputs and mixes to be RETA.
The trims are all…"
My Taranis is in Mode 2 with the throttle on the left. I realised while writing this the EPROM was wiped at one point and the Inputs were different to the Mixes. I have now made both the inputs and mixes to be RETA.
The trims are all…"
Hi,I am having a lot of trouble with a custom build; I'm hoping you can help or point me to info that will solve my issue.Firstly, I'm a complete RC newbie and after a heap of reading, I jumped in the deep end and am building a custom quad copter.…
