I have a new APM2 flashed for aircraft use and installed.. Mavlink is working. Radio is calibrated and mode switch are recongnized and working, but no apparent output.. no servo movement or esc armed.
I have a separate Castle Pro BEC set for 5v, plug
Read more…When I connect my sparkfun to plane, both servos glitch. I can minimize the effect by clasping the jumper/plug (for wireless) into the board with my fingers. So that tells me I need a better connection?
What would that be short of direct solder?
I c
Read more…Having trouble with new apm2 getting to center controls in stabilized mode. All the servo directions and compensating movements seem to be correct (elevon mode), however, when initiating stabilized mode, the controls act as if the plane is not lev
Read more…Wont airflow over the pressure sensor on the oilpan cause varied readings?..
I didnt see it mentioned but it seems logical to protect the unit from airflow.
Thoughts?
Read more…Using elevon setup with new boards..
Controls are working in manual mode and seem to correct/modulate well in stabilize mode, however no matter where the DIPs are set, one axis is always opposite UNTILL I flip the board(s) over with the oil pan facing
Read more…