Gender
Male
About
Location
Flushing, NY
About Me:
I am a aerospace engineer and am in the process of becoming familiar with AHRS/IMU etc.
Please tell us a bit about your UAV interest
Currently interested in using it for a rover but eventually will get a Quad when I retire. Not enough time right now.
Hometown:
Flushing
Activity Feed
I am building a diy controller mostly for learning mavlink using a Teensy 3.5 MCU and APM Planner. I have a lot implemented already: can send messages to APM planner to display GPS, Attitude Data from an IMU, Pressure sensor for Altitude, battery…
"know this is old but you can check this out:
http://ardupilot.org/plane/docs/common-esp8266-telemetry.html
and
https://rays-blog.de/2016/10/21/224/adding-wi-fi-telemetry-to-pixha...
and this
https://github.com/dogmaphobic/mavesp8266"
http://ardupilot.org/plane/docs/common-esp8266-telemetry.html
and
https://rays-blog.de/2016/10/21/224/adding-wi-fi-telemetry-to-pixha...
and this
https://github.com/dogmaphobic/mavesp8266"
"you may want to check out this blog: https://discuss.ardupilot.org/t/mavlink-and-arduino-step-by-step/25..."
"Hi all,
Don't know if this is still active but I am just getting into the nuts and bolts of GPS using the Drotek Neo-M8N referenced in this series of posts. I decided to run a test on the unit while indoors (by a window) and was still getting…"
Don't know if this is still active but I am just getting into the nuts and bolts of GPS using the Drotek Neo-M8N referenced in this series of posts. I decided to run a test on the unit while indoors (by a window) and was still getting…"
