Gender
Male
About
Location
Mackay QLD
About Me:
Part time programmer
Please tell us a bit about your UAV interest
Hobby
Hometown:
Melbourne
Activity Feed
"Other things I found useful were to make sure only position 2 of the microswitch is up (having it down causes all servos to stop moving), to have the CLI switch moved towards the header cable for testing the CLI (obviously). I had to upload the…"
Just sharing a weird experience I had.I had trouble connecting at times and not at others.Using the Hotel.1.0 (H.1.0) Oilpan.After extensive testing I worked out that if I connect a 3 inch wire to the pin opposite to "G2 (39)" on the Tx/Rx connector…
"Another thing I found confusing is that I uploaded the MavLink firmware and when I go in to GCS Mavlink in the GS it doesn't show the orientation in the controls. All instrument controls remain in default positions.
I also couldn't get any of the…"
I also couldn't get any of the…"
"Hi Chris,
Thanks, that's working now.
I think that to make it clearer it would be good to put some very simple instructions in with the Ardupilot when it's purchased. Just a one page printout with link and which options to select to upload would…"
Thanks, that's working now.
I think that to make it clearer it would be good to put some very simple instructions in with the Ardupilot when it's purchased. Just a one page printout with link and which options to select to upload would…"
"I was originally looking at the right manual.I did a search for testing the IMU. That's how I found that link.When I type test and ? I don't get the IMU or gyros option in the list.http://code.google.com/p/ardupilot-mega/wiki/Test
This is what I…"
This is what I…"
"I have the latest Ardupilot Mega 2 with Sheild. I just bought it from DIYDrones, per the site with APM2.1 firmware.
http://diydrones.com/profiles/blogs/ardupilot-mega-home-page
The pin assignments on the orginal test code are different.
Does anyone…"
http://diydrones.com/profiles/blogs/ardupilot-mega-home-page
The pin assignments on the orginal test code are different.
Does anyone…"
"I found this, and that seems to be what I'm looking for.
http://diydrones.com/profiles/blogs/ardupilot-mega-sensor-shield-1?...
Using the ADC test…"
http://diydrones.com/profiles/blogs/ardupilot-mega-sensor-shield-1?...
Using the ADC test…"
Hi, I'm hoping someone can help me.I added the code per http://code.google.com/p/ardupilot/wiki/Test then compiled and uploaded the code#define DEBUG_SUBSYSTEM 6 I go to the console and type "test". I get many options when I type "help", but not…
