Gender
Male
About
Location
Ourense
Please tell us a bit about your UAV interest
Fpv plane
Hometown:
Galicia
Activity Feed
"Ops, you are right, standard wires colours were mixed, but connections are OK, there must be some kind of pass thru, cause I've only power 5v side with ubec and haven't solder or jump anything else, also I've connected video In and Out between Osd…"
"I'm not very experienced OSD'er but that's what I did, a dedicated ubec to OSD, and only powering 5V side, it solved any stability issues I had.
"
"
"That was the same that I thought. I will use Autotune just at the beginning, once I get my plane well tune up I wil change that mode, but it was visible on an older version. And thanks for the feedback Bjoern."
"I already changed Apm parameters, and it didn't change nothing. Autotune doesn't display on OSD but does it on MP."
"Well, I get R800 to work, what I was missing was to power both sides, 5V and 12V, in order to upload firmware. Now, on the bench, I have R800 working, but still doesn't display Autotune flight mode, the others flight modes are shown correctly. BTW I…"
"Hi, everybody, newbie here. Now I'm using MOE 2.4 r 727, on apm 2.7 and minim V1.1., it goes fine, only that doesn't show autotune, the others flight modes are shown correctly. I'm trying to load R800, I have follow all the steps explained on the…"
