Gender
Male
About
Location
NORFOLK
Please tell us a bit about your UAV interest
I have 4 quads. One with and APM board
Hometown:
Norwich
Activity Feed
"Hi,
I am in the process of upgrading my APM 2.5 to the newer APM 2.6. So I thought I would take on board some of the information that I have picked up on vibration, particularly fitting the board and GPS/Compass onto a solid mass.
I machined up an…"
I am in the process of upgrading my APM 2.5 to the newer APM 2.6. So I thought I would take on board some of the information that I have picked up on vibration, particularly fitting the board and GPS/Compass onto a solid mass.
I machined up an…"
"Hi Shyam.
Once again thanks for the replies.
Sorry about the confusion, but thanks for the help.
I will try again.
I have connected to the AMP on output pins 1 to 4 four motors directly to their respective ESC's.
On the inputs I have all the…"
Once again thanks for the replies.
Sorry about the confusion, but thanks for the help.
I will try again.
I have connected to the AMP on output pins 1 to 4 four motors directly to their respective ESC's.
On the inputs I have all the…"
Hi all,This is my first post so please be gentle :)I have recently replaced my multiwii board with a APM 2.5 and have had some setup problemsthat I have unable to resolve.Firstly the quad used to fly very well when using the multiwii board so I…
