Gender
Male
About
About Me:
My name is Mike.
Please tell us a bit about your UAV interest
Love to fly.
Hometown:
USA
Activity Feed
"I have added the 10ohm resister and 100uF cap, shielded cable and extended sonar mount - it is undeniable to me how much of a difference this made for the stability of my quad. Thank you for the great technical post -- this is the kind of stuff that…"
"I like that design, Ian. I have been putting some thought into totally redesigning the landing gear myself, but am probably going to go the heli skid route instead of 4 individual legs.
I made 1 minor change to my 3DR frame that has made a major…"
I made 1 minor change to my 3DR frame that has made a major…"
"That's a great idea; please post some pictures here when you get it worked out."
First of all please understand that what I am posting here is my opinion through about 50 hours of using this frame. I am a quadcoptor novise, so please feel free to correct me if you think I am mistaken.I am using the 3DR frame and hope that this…
"Just FYI - at the start of that video it seems to flip to the left; it actually tries to flip to the back the majority of the time."
Hi All -- I spent the last few hours going through everything to get my quad flying via the DIY Drones wiki. On my very first flight the quad flipped; by using the troubleshooting guide I determined that my ESCs were 1 position to the right off on…
Hello DIY Drones community -- I am reposting this in this section in hopes of getting a response as I am pulling my hair out. I am currently putting my first ArduPilot Mega board together and have all of the soldering done and the firmware loaded. …
Hello DIY Drones community -- I am currently putting my first ArduPilot Mega board together and have all of the soldering done and the firmware loaded. When I go through a few of the tests I noticed that the compass test is returning all zeros,…
