Gender
Male
About
About Me:
I'm UAV ,FPV, HElI, freak
Please tell us a bit about your UAV interest
I build and fly UAV for the last 20 years
Activity Feed
"I got the same phenomena, F/W 3.3 MP 1.3.27....any solution for this problem?? thanks "
"The "stuck problem" solved by replacing the FTDI and upload the minimosd extra_800. the "reset problem" solved by change parameter BRD_SER2_RTSCTS=0 "
" iskess thanks for your reply,at the moment the OSD connected direct to the monitor w/o the camera. but now I tried to upload the firmware 24R719 with CT Tool 2.4.0.01 but it stuck in 94%
Thanks.....again
Moti"
Thanks.....again
Moti"
"This is what i did"
"I download last F/W and now I have to press the reset every time I start the pixhawk
Any advice
Thanks
Moti"
Any advice
Thanks
Moti"
"I have same problem on my 3 computers
I am able to see the two green lights solid and able to bring up the settings under Config/Tunning then 3d radio..i double check connections and they match everything looks good.
Please help!!!"
I am able to see the two green lights solid and able to bring up the settings under Config/Tunning then 3d radio..i double check connections and they match everything looks good.
Please help!!!"
