Gender
Male
About
Location
Troy, MI
Please tell us a bit about your UAV interest
Drones!
Hometown:
Detroit
Activity Feed
"Looks like we had a motor that wasn't performing consistently. Sometimes it would work as expected (during calibration!) but in the real world it wouldn't always work. We've got replacement motors coming and will try again then."
"Thanks a ton for investigating. It's appreciated. I will try this and report back.
What would cause that parameter to be reversed? I've never changed that manually."
What would cause that parameter to be reversed? I've never changed that manually."
"Marc,
Thanks for the reply. Attached is the .bin, and below is an image of the copter. The props are 12x4.5'', however the grey ones are slightly stiffer than the black ones. Could this cause a problem?
I've made a post on the Arducopter forums,…"
Thanks for the reply. Attached is the .bin, and below is an image of the copter. The props are 12x4.5'', however the grey ones are slightly stiffer than the black ones. Could this cause a problem?
I've made a post on the Arducopter forums,…"
Hello,We have a quadcopter we've built using Emlid's Edge flight controller. Everything is well calibrated (according to QGroundControl) and looks fine. Whenever we attempt to takeoff, the drone flips over on its side pretty much instantly. It is a…
