Gender
Male
About
About Me:
i am an electronic engneering student.
Please tell us a bit about your UAV interest
As a final year project i am intrested in building a UAV, i had a helicopter and thought about what if it could fly without controlling it with a remote control and do it just by using sensors and i started to research and came across a website which directed to diydrones and found lots of information that i can get started with. i want to make a UAV for public service eg riot police: for monitoring rioters, identifing criminals etc. Fireman: using UAV for checking the temperature, the state of a building or a house etc. these are some idea that i have and want to make it possible.
Hometown:
UK
Activity Feed
"but will MS 3s 5200 and 4000 be good on hexacopter?? I got these battery today."
"@ Nathaniel about 10 to 15 would be good with the gopro.
@ Hollen Day will look up at that site.
Thank you for the suggestions"
@ Hollen Day will look up at that site.
Thank you for the suggestions"
"@Hollen Day did a test flight of my Y6 today it worked, now got to get a new battery for more flight time.
850kv motor, 20amp blheli firmware, weight: 1.290kg, 10x4.5 CF prop
Any suggestions for battery? And thank you for your help"
850kv motor, 20amp blheli firmware, weight: 1.290kg, 10x4.5 CF prop
Any suggestions for battery? And thank you for your help"
"@Hollen Day it's my silly mistake it's the props that where wrong way round will try to hover the y6 tomorrow."
"@Hollen Day do you think I need to change anything like the prop or battery"
"@Hollen Day I checked the motor direction to. I am using the new layout top three motors CW and bottom three CCW."
"I built a y6 850kv motor, 10inch prop, 20amp blheli esc and just for testing purpose I am using 2200mah lipo everything works fine but there is no lift. Double checked the pins on the apm which is running the latest firmware. Still I can't figure…"
IMAG0879
-
Nishid I have not done any changes to it nor I have used any software. It is all default settings.
-
Nishid Hello hamza here is the link for the video: http://www.youtube.com/watch?v=rtERO8R-gzg&feature=youtu.be
-
Nishid Hello hamza I will make a video tomorrow and post it here on how I did it. But I have only tested this setup with the mission planner and as I turn the knob which is connected to the channel 5 the flight mode changes from flight mode 1 to flight…
-
Nishid FLIGHT MODES SELECTION USING THE KNOB(CHANNEL 5) ON THE HK-T6A V2 2.4GHX RADIO
"@TFrancis
TRY THIS:plug the APM2 BOARD to you computer and go to control panel --> system --> Devise Manger and there you will see a icon with a magnifing glass click on it. when you do so it will scan the computer to detect if you have pluged any…"
TRY THIS:plug the APM2 BOARD to you computer and go to control panel --> system --> Devise Manger and there you will see a icon with a magnifing glass click on it. when you do so it will scan the computer to detect if you have pluged any…"
"THIS IS FOR PEOPLE HAVING TROUBLE UPLOADING BOTH THE CODE APMROVERV 1.0 AND APMROVER V2 using ARDUINO IDE.
(1) unzip the folder that you download from this page.
(2) copy and paste APMROVERV 1.0 or APMROVER V2 and its LIBRARIES folder on to the…"
(1) unzip the folder that you download from this page.
(2) copy and paste APMROVERV 1.0 or APMROVER V2 and its LIBRARIES folder on to the…"
