Gender
Male
About
Please tell us a bit about your UAV interest
flying
Hometown:
Cologne
Activity Feed
"Hi Seppo,
I have two of your RFDFLEX1 900MHz antennas and one of RFDFLEX2 and we are going to build a rangevideo rvjet.
https://www.google.de/search?q=rangevideo+rvjet
Do you have any suggestion which two antennas and where and how to place them for…"
I have two of your RFDFLEX1 900MHz antennas and one of RFDFLEX2 and we are going to build a rangevideo rvjet.
https://www.google.de/search?q=rangevideo+rvjet
Do you have any suggestion which two antennas and where and how to place them for…"
"here are the compass params attachedcompparam1.pngcompparam2.png"
"I did the screenshot during connecion with USB. If using the radio it's the same behavior.
Can't remember if I changed any parameter. I have the problem already a long time.
This morning I flashed V3.2.1 hoping that all parameters are resetted but…"
Can't remember if I changed any parameter. I have the problem already a long time.
This morning I flashed V3.2.1 hoping that all parameters are resetted but…"
"I'm using V3.2.1 for quad and MP 1.3.30.
The i2c pins are not bent.
I just tried again to calibrate and can observe that compass 2 error is changing but still no sample are collected and the frame isn't rotating if I rotate the compass.
Please see…"
The i2c pins are not bent.
I just tried again to calibrate and can observe that compass 2 error is changing but still no sample are collected and the frame isn't rotating if I rotate the compass.
Please see…"
"Chris, yes I used compass type Pixhawk/PX4 with MP and there is and was on my side miles around no magnetic source near by the the compass.
I also tried different cables and connected always both when trying to calibrate (compass and GPS). The GPS…"
I also tried different cables and connected always both when trying to calibrate (compass and GPS). The GPS…"
"I'm sure that this didn't happened from my side but I will take your hint into consideration if no one other has another idea what could be wrong."
"Thanks for your reply Andreas but I don't think that this applies to both of the new compass modules. And I assume that the store isn't so stupid to place mangetic things near by the modules. :-)"
Hi, I have problems to calibrate the external 3dr compass with my pixhawk.Using Mission planner l select Pixhawk/PX4 and try live calibration.I see for compass 1 and 2 error 99 and never more then 3 samples are collected.The behavior is very similar…
