Hi
Please help.
I was flying this same build-- ( apm 2.0 on a dji 330 frame motors and dji esc ) before and loved it.
It has sat for a few months,with better weather, I plugged it in and updated to the 3.1.3
No way will it arm the APM2.0
Originally, I was
Read more…I have a 2.0 that i want to use for my rover project, but before I start, I want to make sure that it is fully compatable with the rover code.I plan on using the following combination.Electric wheelchair base unit.2.0 controllerSabertooth 2x25 motor
Read more…I had originally shorted the 5v rail and ground on the ppm input blowing the d1 diode.
I have replaced the diode D1.
I have plugged the apm 2.0 into the mission planner. All seems to be working now as expected.
except, It won't arm.
The radio seems to be
Read more…Damn
and things were going so well!
I accidentally shorted the 5v line and the ground on the apm2.0 on the ppm input
esc's still seem to work ( but dont arm)
reciever seems to work
but the apm wont arm.
anyone wish to provide me with possibilities before
Read more…Hi everyone.
Hope this gains some interest because to me it seems like a natural.
The mecanum wheels allow both front, back and lateral movement much like the multicoptef on the ground (as in the video below)
This functionality seems a much more natu
So my apm2.0 dropped form the sky when i found that my failsafe was set to cut throttle at loss of signal----OOPS. The APM2.0 did not impact directly, but the GPS antenna was yanked right from the board breaking the traces but looked recoverable. I t
Read more…