Gender
Male
About
Location
West Bengal
About Me:
I am a Science Post Graduate in Physic and fond of model aircraft making and flying.
Please tell us a bit about your UAV interest
I like to study the aerodynamics of the UAVs. Understanding the aircraft stabilization and automation etc. are the most loving subjects for me.
Hometown:
Kolkata, India
Activity Feed
"Hi, The order you have mentioned1,2,3,4 if right may cause the problem. Always switch ON the transmitter nd then only power the copter, i.e. Rx to be power after switch on the Tx. This may cause the problem. Any way you can check the log for…"
"Thanks for your suggestion. I will buy a taranis. Nice to chat with you.
Pradeep "
Pradeep "
"Hi,
Thanks a lot for sharing your experience and for your suggestions. I am decided to buy a taranis. Before that I want to try with a 2.4 GHz Yagi 15 element directional antenna with my old CT6B. Is that be a good idea? I saw people use…"
Thanks a lot for sharing your experience and for your suggestions. I am decided to buy a taranis. Before that I want to try with a 2.4 GHz Yagi 15 element directional antenna with my old CT6B. Is that be a good idea? I saw people use…"
"Hi,
You are right. I go through a flight log analysis and got "throttle fail safe" and RTL activated. But it is only 150 to 200 ft. It is very strange that I found some people claiming 500 to 800 mtr !!!!! range with the same radio. I know Taranis…"
You are right. I go through a flight log analysis and got "throttle fail safe" and RTL activated. But it is only 150 to 200 ft. It is very strange that I found some people claiming 500 to 800 mtr !!!!! range with the same radio. I know Taranis…"
"Thanks for the reply.
Yes I have a geo fence set at 300 ft but the problem occurs at half of that distance. Can it be a receiver antenna position problem."
Yes I have a geo fence set at 300 ft but the problem occurs at half of that distance. Can it be a receiver antenna position problem."
Hi,I am using a APM 2.6 FC for my S500 quadcopter. It is also fitted with telemetry to show flight parameters at gcs. I am frequently having a problem of auto initiation of RTL mode at a flight level of 150 to 200 ft, though the set mode is LOITER.…
"Have you connected the pixhawk to mission planner ? is it responding?"
"After freezing what happens? I mean the current status of the flight controller?"
