Gender
Male
About
Location
Alberta
Please tell us a bit about your UAV interest
Arducopter
Hometown:
Medicine Hat
Activity Feed
"Thanks Lherning. The Throttle Failsafe solution is the one I'm using for now."
Hello everyone,I'm trying to setup the loss of RC comms with my RMILEC long range system (LRS). Basically, there are 2 modes you can choose from (custom servos and channel positions or hold last servos positions). The system works by sending regular…
Hi everyone,Has anyone ever had any issues with interfacing the SF02 Lidar with Pixhawk 3.3V A/D port ?I got 3 Lightware SF02s, 2 Pixhawks and only one SF02 works has described in http://ardupilot.org/copter/docs/common-rangefinder-sf02.html . The 2…
"Hi Craig,
I tried AltHold only and it behaves like PositionHold. At low altitude, the hex drifts downward exactly like in PosHold. I haven't tried AltHold at higher altitudes (> 20-30 m).
I did the mid throttle calibration so that the hex hovers at…"
I tried AltHold only and it behaves like PositionHold. At low altitude, the hex drifts downward exactly like in PosHold. I haven't tried AltHold at higher altitudes (> 20-30 m).
I did the mid throttle calibration so that the hex hovers at…"
I have used Position Hold before but for whatever reason now it seems to work at higher altitude but not at lower altitude.It seems that the Desired Altitude is stable at higher altitude in my case (35-40 meters). When I try to enable PosHold at…
