Gender
Male
About
Location
Alberta
About Me:
I like cheese
Please tell us a bit about your UAV interest
I build Uav's
Hometown:
Alberta
Activity Feed
"I am going to try re downloading a new config file and making sure there isn't a syntax error in mine somewhere.
I am aware of how the remote port thing works. I will probably be using ROS in the mean time to see if i can get ROS to fix the remote…"
I am aware of how the remote port thing works. I will probably be using ROS in the mean time to see if i can get ROS to fix the remote…"
"Hey
I ran wireshark and it told me the same thing everythign else did.
9621 88.621924 source: 192.168.42.1 destination: 192.168.42.11 UDP 70 Ports: 40473 → 14550 Len=28
I input the remote port as 40473, the local port as 14550, and the ip as…"
I ran wireshark and it told me the same thing everythign else did.
9621 88.621924 source: 192.168.42.1 destination: 192.168.42.11 UDP 70 Ports: 40473 → 14550 Len=28
I input the remote port as 40473, the local port as 14550, and the ip as…"
"Hey
Thanks for the reply.
Mavproxy simply handles the mavlink connection on the pi(in the drone). Its allows me to transfer it from the uart port to the network interface. Its functioning correctly.
The pi's ip is 192.168.42.1 and is the default…"
Thanks for the reply.
Mavproxy simply handles the mavlink connection on the pi(in the drone). Its allows me to transfer it from the uart port to the network interface. Its functioning correctly.
The pi's ip is 192.168.42.1 and is the default…"
HelloI can't seem to connect to my vehicle via udp/wifi connection. I can connect with both mission planner and qcg with my setupMy setup is as followspix2raspberry pi 3 (handles networking and mav proxy)quad plane running arduplane 3.7futaba t8fg…
