Location
milan
About
About Me:
Tech enthusiast, passion for RC boats
Please tell us a bit about your UAV interest
Auotonomous boats, also for surveying
Hometown:
milano
Activity Feed
Hello,I wonder if it is possible to adjust ardu-software parameters (I need it for a boat, but the same question applies to a plane or a mutlirotor), in order to DUPLICATE output PWM on several PINs, so that the setting applies also to all…
"Adam, thanks for your answer.
I'll do some more attempts.
It would seem very silly to me if it could not be done by tuning the software... it is just a simngle line of code to be added at the end of the thread, just copying teh PWM value to an…"
I'll do some more attempts.
It would seem very silly to me if it could not be done by tuning the software... it is just a simngle line of code to be added at the end of the thread, just copying teh PWM value to an…"
Hello,I wonder if it is possible to adjust ardu-software parameters (I need it for a boat, but the same question applies to a plane or a mutlirotor), in order to DUPLICATE output PWM on several PINs, so that the setting applies also to all…
"Hello,
I'm facing the same problem, i.e. trying to integrate four (4) thruster to my boat, to improve redundancy, and I want to send the same output PWM signal pair-wise to two thrusters (skid steer setting): both LEFT ESC should receive the same…"
I'm facing the same problem, i.e. trying to integrate four (4) thruster to my boat, to improve redundancy, and I want to send the same output PWM signal pair-wise to two thrusters (skid steer setting): both LEFT ESC should receive the same…"
